This is the original bowl seal and can be used on both VacuFlush and Traveler Toilets
This Seal is the preferred seal for VacuFlush Pedal operated Toilets and Newer Gravity toilets that DO NOT HAVE DRAIN HOLES IN THE BASE(Replaces 385310677)
This Kit can be used with any foot operated toilet that has a reinforced plastic pedal cover.(This updated Kit included a Brass Shaft)
This Kit can be used with any foot operated toilet that has a metal flush rod covered by a plastic pedal cover.
These 2" Duck Bill Valves will Fit J, L, B & M Pumps.
The Dwyer digital vacuum gauge is easy to read, accurate, and lightweight. It is an essential tool for reading PSI in testing for vacuum leaks, saving you time and frustration. We compared the Dwyer to more expensive models and we found it...
This is the seal that is used between the toilet base and the floor flange.Works with toilet models that end with '06, '09, '10 and '11.
K-506 REBUILD KIT.
This rebuild kit contains the repair parts required to refurbish a SeaLand Vacuflush 506 and Traveler 511 Toilet.
This Kit Contains:
311462 Teflon and rubber Bowl seal
318162 Ball, Shaft and spring cartridge
These bellows are newly redesigned that will fit all S/T & J Pumps Old or New Style. (Includes eccentric bolt).Better durability and longevity than previous designs, the newest bellows can be determined by the grey arm & grey bottom.
Replacement 1 1/2" Duck Bill Valves for "T" and "S" Series Pumps (2 pack of 347802 1 1/2" Duckbill valve)
"T" pumps require 1 pack"S" pumps require 2 packsVG2 vacuum generators require 2 packsVG3 vacuum generators require 2 packs
This set of three "O" rings is used with the older ring clamp style pump.
This set of 2 "O" rings will fit both S and T pumps that have 8 screws connecting the top and bottom together.( Not for the old Ring Clamp pumps which use the 385319039 "O" rings, Set of 3)